TO LOGIN
Follow the steps below to open the Web Programming.
Internet browser
STEP 1: Start up
STEP 2: Enter IP address of the target DT830 Series on the address toolbar and then press Enter key.
STEP 3: The Web Programming Login screen appears. Enter a user name (type "USER") and a password, then click
OK
.
Note:
Enter the same password used when logging into the DT830 Series. "0000" is used as password by the default
setting.
Note:
For IP address of DT Series, contact the System Administrator.
Note:
When the login screen does not appear, check the LAN connection status and entered IP address. If the problem
persists, please contact the system administrator.
on the PC.
239