Call Pickup - NEC SV-8100 User Manual

2. Press the Hold key and talk with the party.
9
Repeat Redial
To use Repeat Redial (if the outside party you call is unavailable or busy):
1. Place a trunk call. Note: Listen for busy tone or ring-no-answer.
2. Press the Feature + Redial keys. Note: Your Repeat Redial key flashes while you
wait for the system to redial.
3. Press Speaker to hang up. Note: The system periodically redials the call.
Note: System programming determines the waiting time and the number of redial
attempts.
4. Lift the handset when called party answers.
Note: When using trunks with answer supervision the Repeat Redial feature will
automatically cancel.
To cancel Repeat Redial:
1. Press the Feature key.
2. Press the Redial key - OR - Press Repeat Redial Key (Service Code 751: 29).
Caller ID
Answer
Receive incoming ringing or transferred outside call:
1. Review the telephone display for the calling party's name or number.
2. Answer the call accordingly.
Temporary Memory
An unanswered call will cause the Call History key to flash, indicating a new call has
been placed in the temporary memory. If enabled in programming, the telephone's
display will show "CHECK LIST".
1. Press the Call History key or press the LIST Softkey and CID.
Note: The last addition to the list is displayed.
2. Press the ARROW DOWN Softkey to scroll through the list of numbers in memory.
3. Press the DEL Softkey to delete the entry and scroll to the next entry.
4. The Call History key will remain on as long as entries remain in memory.
5. To place a call back to a number in the temporary memory list, with the number to
be dialed displayed, press a line or Speaker key.
21

CALL PICKUP

Group Call Pickup
To answer a call ringing another telephone in your Pickup Group:
1. Pick up the handset or press the Speaker key.
8