NEC DT830 Series User Manual page 59

0
STEP 5: Select Automatic,
able (see the following table).
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
0 2
• Press -
key.
[DTMF Tone]
0
Automatic
1 Disable
Enable
2
Menu Items
Follow the setting on the System.
If no setting is made in the Sys-
0 Automatic
tem, the default setting
(DTMF=ON) is applied.
Follow the setting on the terminal
1 Disable
(OFF).
Follow the setting on the terminal
2 Enable
(ON).
Note: For the setting on the System, contact the Sys-
tem Administrator.
Note: The enabled item is highlighted.
1
Disable or
, and then press
key, and then press or OK soft
Back
OK
Descriptions
2 • TO SET KEY TOUCH TONE
En-
The procedure below shows how to set Key Touch
Tone. Key Touch Tone is a tone generated when the
digit keys are pressed while DT Series is off-hook.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select
Select an item by either of the following operations.
• Highlight an item by using
• Press
STEP 3: Select
Select an item by either of the following operations.
• Highlight an item by using
• Press
51
1
User Setting.
or OK soft key.
1
key.
[Setting]
1
User Setting
2
Download
Data Backup/Restore
3

Menu
2
Talk.
or OK soft key.
2
key.
, and then press ,
OK
, and then press ,