NEC DT830 Series User Manual page 257

• To switch mobile phone answer mode
Depending on the specifications of a mobile
phone, the operation to start a conversation af-
ter answering the incoming call with the mobile
phone is different. You can start a call smooth-
ly by setting the mobile phone answer mode
according the specifications of each mobile
phone. Choose the mobile phone answer
mode corresponding to the mobile phone in
use.
Smart Device Type (Type 1):
When you answer an incoming call with the
mobile phone, the answered call will be
switched from DT830 Series/DT430 Series to
the mobile phone automatically.
Note: Depending on the type of mobile phone, a delay on
the starting of the conversation may happen.
Smart Device Type (Type 2):
It is used for the type of mobile phones that de-
lays the start of a conversation when it an-
swers the call on Type 1.
Note:
When you use this mode for a mobile phone that
can start immediately a conversation with Type 1,
the call may be on the DT830 Series/DT430
Series.
STEP 1: Press and hold the Path key when the
terminal is in idle status.
STEP 2: You will hear a beep tone when the
terminal mode is switched.
• Smart Device Type (Type 1): The beep
tone sounds once.
• Smart Device Type (Type 2): The beep
tone sounds twice.
Note:
For details of recommended type of mode, contact
the system administrator.
249