To Logout; Display Enlarged Characters - NEC DT830 Series User Manual

TO LOGOUT

DT830
STEP 1: Press the preassigned Logout Feature Key
on the terminal.
Note: This feature is only available for DT830 Series.
Note: The soft key location is an example.
Note: Logout key is assigned by data setting at the
ECP (Enterprise Communication Platform).
7:25 AM MON 22 SEP 2014
Mic NoDist
STEP 2: "LOGOUT?" is displayed on the LCD of the
terminal.
LOGOUT?
7:25 AM MON 22 SEP 2014
Logout
STEP 3: Press the Logout Feature Key on the termi-
nal again. The terminal displays the Login
screen.
Login ID :
Password :
Cancel Back
>>>
>>>
-
Set OK
DISPLAY ENLARGED CHARAC-
TERS
DT830
This feature enables to display characters height as a
double height size for the terminal information on the
LCD. The indication of enlarged characters is available
for 2nd line or 3rd line on the LCD. The line displayed
as enlarged characters can be switched by using the
Line/Feature Key for "Display Enlarged Characters".
Note: The feature key of "Display Enlarged Characters"
is assigned at installation. For details, contact the
system administrator.
To Switch the Line Indicating Double Height
Characters
By pressing the Soft Key or the Line/Feature Key, you
can switch the characters displayed to double height
size in the order of "Enlarged Characters (2nd line)" →
"Enlarged Characters (3rd line)" → "No Enlarged
Characters".
The following shows an example when using this fea-
ture.
• No Enlarged Characters
7:25 AM MON 22 SEP 2014
Mic
95
31313
NoDist >>>