Forced Account Code; Authorization Code; Voice Call - NEC DT830 Series User Manual

FORCED ACCOUNT CODE

DT830 DT430/410
STEP 1: Lift handset or press
tone.
STEP 2: Enter feature access code, receive service
set tone.
STEP 3: Enter "Forced Account Code" (up to 10 dig-
its), receive dial tone.
Note:
For North America, Account Codes can be up to
24 digits.
Note: For North America, the total number of digits
which can be entered for Authorization and
Account Codes is 34 digits.

AUTHORIZATION CODE

DT830 DT430/410
To Enter Without Account Code
STEP 1: Lift handset or press
tone.
STEP 2: Enter feature access code, receive service
set tone.
STEP 3: Enter "Authorization Code" (up to 10 digits).
STEP 4: Receive dial tone, dial desired number.
- Or -
STEP 4: Lift handset, receive dial tone.
Speaker
key, receive dial
Speaker
key, receive dial
STEP 5: Dial desired number.
STEP 6: If an "Authorization Code" is required, caller
hears special dial tone.
STEP 7: Enter "Authorization Code", or call will be de-
nied.
Note:
This option is available only if system is pro-
grammed with Least Cost Routing.
To Enter With Account Code (see above)
Service set tone is optional depending upon system
programming.
Note: If a 4, 8, 16 or 32-button display terminal is used,
the display indicates all of the digits dialed.

VOICE CALL

STEP 1: Lift handset.
STEP 2: Dial desired station number.
STEP 3: Press Voice.
VOICE
1:25 PM
STEP 4: Speak to called party.
134
DT830 DT430/410
2000
MON 22 SEP 2014