Connecting Ac Adapter; Installing Directory Card - NEC DT830 Series User Manual

CONNECTING AC ADAPTER

DT830 DT430/410
STEP 1: Insert AC adapter plug into the connector of
AC adapter (AC-L UNIT) on the back of tele-
phone.
AC Adapter Cord
AC Adapter Plug
STEP 2: Fix the AC adapter cord through the groove
on the back of telephone.
AC Adapter Cord
AC Adapter Plug
Connector for AC Adapter
Telephone
Connector for AC Adapter
Telephone
Groove

INSTALLING DIRECTORY CARD

DT830 DT430/410
A directory card (also known as an abbreviated dialing
table) can be attached to the telephone sets. The
directory card can be used to record often dialed
numbers or other important information. Directory
cards are available as options.
Note: To remove the directory card, pinch the two sides
of the directory card holder inward until the tabs
release and pull the holder out of the grooves.
STEP 1: Remove the protective sheet from the cover.
STEP 2: Attach the cover to the directory card and
then attach it to the directory card holder.
Directory Card
29
Grooves
Cover
Holder