To Originate A Call Using Speed Calling; (One-Touch Speed Calling Keys) - NEC DT830 Series User Manual

TO ORIGINATE A CALL USING SPEED
CALLING

(ONE-TOUCH SPEED CALLING KEYS)

DT830 DT430/410
STEP 1: Press the desired One-Touch Speed Call-
ing key, or press
Speed Calling key.
To Program
(Available only on DT Series with One-Touch Speed
Calling key.)
STEP 2: Press
Feature
STEP 3: Press desired One-Touch Speed Calling
key.
STEP 4: Enter desired telephone number or feature
access code on the keypad.
Display indicates the digits dialed.
STEP 5: Press
Feature
SPEED SET
1:25 PM
Mic NoDist
To Verify
STEP 2: Press
Feature
STEP 3: Press desired One-Touch Speed Calling
key.
STEP 4: Display indicates digits programmed.
Speaker
key and One-Touch
key.
key again to save the number.
MON 22 SEP 2014
>>>
key.
Note:
To program a hook switch for transfer or feature
activation, press
plays on LCD.)
Note:
To program a pause, press the
any digit other than the first digit. (– displays on
LCD.)
Note:
To program a Voice Call, press
dialing station number. (Voice displays on LCD.)
Note: One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a
feature key by storing the feature access code.
The features may be programmed on a system
basis by the Telephony Server Admin.
Access codes may be stored in conjunction with
telephone numbers. For example, you can pro-
gram one button to transfer to a certain extension.
LCD Indication of DESI-less screen
STEP 1: Press the desired One-Touch Speed Call-
ing key and originate a call.
Registered name will be displayed as follows.
For the key to which no name information is
registered, the character "SPD" will be dis-
played.
When registering Name Information of One-touch
Speed Calling, you can use uppercase alphabetic,
uppercase European or lowercase European
characters.
Note:
For details of available characters, see TO REG-
ISTER NAME ON ONE-TOUCH SPEED CALL-
ING KEY.
129
key as first digit. (! dis-
Recall
key as
Transfer
key after
Transfer