Setting The Alarm - YOKOGAWA mR10000 436101 User Manual

Setting the Input Range and Alarm on Measurement Channels

Setting the Alarm

38
Setup Example
Set a high limit alarm at 400.0°C on channel 02. The relay output (option) is not
available.
Entering Setting Mode
1.
Hold down the
Selecting the Channel
2.
Press the key with Alarm shown on the screen.
Set=Alarm
Alarm setting
3.
Press the key to set the first channel to 02 and then press the
First channel Last channel
CH=01-01
First channel 01-
4.
Likewise, set the last channel to 02 and then press the
Setting the Alarm Condition
5.
Press the key to select 1 and then press the
Up to four alarms can be set on a single channel. Each alarm is distinguished by
its level: alarm level 1 to 4. In this example, alarm level 1 is used.
Level=1
1-4
6.
Press the key to select On and then press the
On: Enables the alarm of the selected alarm level.
Alarm=On
On/Off
7.
Press the key to select H and then press the
The letter "H" represents the high limit alarm (see "Explanation").
Type=H
High limit alarm
8.
Set the alarm value to 400.0 by carrying out the key operations below.
Press the
Press the key to select the value.
When all digits have been set, press the
Value=
-200.0/ 1370.0˚C
Setting the Relay Output
9.
Since the relay output is not used, press the
Relay=Off
On/Off
The Setting complete screen is displayed. When this screen is displayed, the
settings entered up to then are applied.
* When the key or
reversed as when the respective key is pressed by itself.
key for 3 seconds to enter Setting mode.
MENU
Displays a description of the setup item.
Displays the selectable range of channels.
Displays possible choices.
Displays a description of the selected type.
key to select the desired digit.
Displays the measurable range of the
1.000
input range specified on the channel.
key is pressed while holding down the SHIFT key, the operation is
key.
key.
Displays the selectable range.
key.
key.
key.
key with Off selected.
Displays possible choices.
key.
IM 04P01B01-02E