Table of Contents
Advertisement
Recording/Displaying Data
FUNC Key Operations in Operation Mode
FUNC
key
Alarm ACK
(section 3.12)
Math
(section 9.1)
Print out
(sections 3.7, 3.8)
Message
(section 3.10)
Buffer clear
(sections 3.9, 3.10)
Keylock
(section 3.13)
Periodic
(section 3.11)
Pen exchange
(section 3.3)
R. exchange
(section 3.4)
Printing Measured Values (Manual Printout)
46
The operations below can be carried out with the FUNC key in Operation mode.
References to the µ R10000 Recorder User's Manual (IM 04P01B01-01E) provided on
the CD-ROM are given in parentheses.
: Use the
key.
: Use the
key.
Start/Stop
Reset
ManualStart/Manual Stop
List Start/List Stop
Setup Start/Setup Stop
Message 1
Message 2
Message 3
Message 4
Message 5
Alarm
Message
Password
Reset
Pen exchange = End
R. exchange = End
The measured values of all channels are printed.
Starting the Manual Printout
1.
Press the
FUNC
The Func= screen appears.
2.
Press the
Func=Print out
3.
Press the
Manual printout starts. The screen returns to the data display screen.
Print=ManualStart
Note
•
When manual printout is executed, trend recording is suspended. However, the recorder
continues the measurement and alarm detection (in the background).
•
When manual printout is complete, trend recording resumes.
•
If an alarm occurs during the manual printout, the alarm is printed after the recording
resumes.
* When the
key or
reversed as when the respective key is pressed by itself.
Alarm output release operation. This is displayed when the
settings are changed to use the alarm ACK operation.
Starts/stops the comuputation. This is displayed on models with
the computation function (/M1 option).
Resets the comuputation.
Executes manual printout (printout of measured values).
Executes the setting (Setting mode) printout.
Executes setting (Basic Setting mode) printout.
Prints message 1.
Prints message 2.
Prints message 3.
Prints message 4.
Prints message 5.
Clears the data waiting to be printed in the alarm printout buffer.
Clears the data waiting to be printed in the message printout buffer.
This is displayed when the settings are changed to use the key
lock function. It is used to activate or release the key lock.
Resets the computed value when printing of the report data
(average, etc.) is specified in periodic printout and restarts the
calculation of the report data from that point.
Moves the recording pen to a position that is easily accessible for
replacement on the pen model.
Moves the printer carriage near the center position when replacing
the ribbon cassette on the dot model.
key.
key to select Print out and then press the
key with ManualStart shown on the screen.
key is pressed while holding down the SHIFT key, the operation is
Firmware version: 1.31
key.
IM 04P01B01-02E
Hide quick links:
Advertisement
Table of Contents
