Changing The Chart Speed; Viewing The Recorded Results - YOKOGAWA mR10000 436101 User Manual

Changing the Chart Speed

Viewing the Recorded Results

IM 04P01B01-02E
1.
Hold down the
2.
Press the key to show Chart and then press the
Set=Chart
Chart speed
3.
Set the chart speed and press the
mm/h= 20
1/1500mm/h
On the pen model, press the
Chart speed on the pen model (unit: mm/h)
5 6
24 25
60 64
135 150
320 360
720 750
1500 1600
3600 4000
10800 12000
On the dot model, enter a vale to set the chart speed. The chart speed can be
set in the range of 1 to 1500 mm/h in 1 mm steps.
Press the
Press the key to select the value.
4.
When the Setting complete screen appears, the new chart speed is applied.
Chart speed
Setting complete
Press the ESC key to change the chart speed again.
Hold down the
Pull the front cover tab of the chart cassette to open the front cover. The recorded chart
paper can be pulled out for viewing.
Recorded chart paper can
be pulled out.
* When the key or
reversed as when the respective key is pressed by itself.
key for 3 seconds to enter Setting mode.
MENU
Displays a description of the setup item.
key.
key to select the chart speed.
8 9 10
30 32 36
72 75 80
160 180 200
375 400 450
800 900 960
1800 2000 2160
4320 4500 4800
key to select the desired digit.
key for 3 seconds to return to Operation mode.
MENU
Front cover tab
key is pressed while holding down the SHIFT key, the operation is
Recording/Displaying Data
key.
Current chart speed.
Displays the range that can be specified.
(Display example on the dot model)
12 15 16
40 45 48
90 96 100
225 240 250
480 500 540
1000 1080 1200
2250 2400 2700
5400 6000 7200
18 20
50 54
120 125
270 300
600 675
1350 1440
2880 3000
8000 9000
41