Names Of Parts - YOKOGAWA mR10000 436101 User Manual

Names of Parts

Front
Rear Panel
IM 04P01B01-02E
Display and key panel
Hold the tab at the lower
left and pull to open.
Door
Tag plate
Used to write
Chart cassette
channel names.
Holds the chart paper.
Pen model
Recording pen
Records the measured value.
Plotter pen
Prints various types
of information.
The portable type (/H5x option) comes with a handle, feet, and dedicated power supply
connector.
Function Introduction/Names of Parts
Mounting hole
There is one hole on each of the
top, bottom, left, and right panels.
The hole is covered with a seal.
Power switch
Turns ON/OFF the power each
time the switch is pressed.
Dot model
Display and key panel (see the next page)
There is an internal light on the bottom section
of the display and key panel. It lights up the
recording area of the chart paper.
Heatsink
Dissipates the internal heat.
Power terminal block
The power terminal and protective ground terminal.
Optional terminal block
This is where terminals or ports used by options such
as alarm output relays and communication interface
are installed.
Measuring input terminal block
Measuring input terminals.
Ethernet port (/C7 option)
Name plate
The model name is written
on the name plate.
Ink ribbon
Six-color ink.
Printer carriage
Records measured values
and prints various types of
information.
9