Key Operation - YOKOGAWA mR10000 436101 User Manual

Key Operation

Entering Setting Mode
Exiting from Setting Mode (Returning to Operation Mode)
Entering Basic Setting Mode
Exiting from Basic Setting Mode (Returning to Operation Mode)
IM 04P01B01-02E
Hold down the key for 3 seconds.
MENU
The Setting mode display appears. The top and bottom lines are the setup item and
comment, respectively.
The section that is blinking is the setup item that you change. In this manual, the section
that you change appears shaded.
Set=Range
Setup item
Input range and
Comment
In Setting mode, the panel keys are set to the functions marked above the keys.
CHARACTER
RCD MENU DISP FUNC
Hold down the key for 3 seconds.
MENU
The recorder returns to operation mode.
Hold down the key for 3 seconds to enter Setting mode. Next, hold down both the
MENU
( ) key and the
DISP
The Basic Setting mode display appears. The top and bottom lines are the setup item
and comment, respectively.
The section that is blinking in the setup item that you change.
Setup item Basic=Alarm
Auxiliary alarm
Comment
Press the ESC ( ) key several times to return to the Basic= screen.
MENU
1
Press the ( ) key to select End and then press the
DISP
save screen appears.
Basic=End
Save Settings
Press the ( ) key to select Store and then press the
DISP
is applied, and the screen returns to Operation mode. If you select Abort and press the
( ) key, the setting is discarded, and the screen returns to Operation mode.
CH UP
End=Store
Save settings and
Common Operations and Menu Structure
ESC/? SHIFT
1 MENU FEED CH UP
( ) key for 3 seconds.
FUNC
The item to be controlled blinks.
The item to be controlled blinks.
( ) key. The setup
CH UP
( ) key. The setting
CH UP
21