Changing The Displayed Information - YOKOGAWA mR10000 436101 User Manual

Changing the Displayed Information

1CH digital display
1H3000.0ABC
6CH digital display
(Dot model)
999.9 999.9 999.9
999.9 999.9 999.9
4CH bargraph display
Multiple display
1H-1999.9ABCDEF
05/08/31 11:26:37
(Different screens can be assigned to top and
bottom sections)
Tag_1CH digital + 1CH bargraph display
abcdefgH-1999.9ABC
Batch name display
Batch Number-0001
IM 04P01B01-02E
Different display types can be registered to screens 01 to 15. As an example, the procedure
of assigning 1-channel digital display (tag display) to screen 02 is explained below.
1.
Hold the
MENU
1
Selecting the Screen Number
2.
Press the
Screen No.=02
A sample screen of the display type appears. A section of the display blinks to
indicate that this is a data display setup screen.
Selecting the Display Type
3.
Press the
display and then press the
TAG001A
200.0 mV
4.
Press the
Interval:
Auto1s, Auto2s, Auto3s, Auto4s, Auto5s:
Manual:
Interval=Auto2s
5.
When the Setting complete screen appears, the new setting is applied.
Screen No.02
Setting complete
Press the
Hold the MENU
1
screen.
Display Types
Display types listed below are available besides the types on previous page.
2CH digital display
1H-1999.9ABCDEF
2L 2000.0PQRSTU
2CH digital + 2CH bargraph display
1H3000.0 2L-999.9
6CH bargraph display
(Pen model)
Tag_1CH digital display
abcdefg
H-1999.9ABCDEF
Tag_1CH digital + 1CH bargraph display
(Pen model)
abcdefgH-1999.9ABC
Lights out
No display.
* When the key or
reversed as when the respective key is pressed by itself.
key for 3 seconds to show the data display setup screen.
key to select screen number 02 and then press the
Displays the current display type name.
key to switch the display. Select the TAG001A (Tag_1CH digital)
key.
key to set the channel switching interval and then press the
Sets the channel switching interval. Select the interval from
1 s, 2 s, 3 s, 4 s, 5 s, and manual.
Switches the displayed channel at the specified time interval.
Switch the displayed channel using a key (
key to register display types to other screens.
key down for 3 seconds to exit from the data display setup
(Dot model)
Tag
key is pressed while holding down the SHIFT key, the operation is
Recording/Displaying Data
CH UP
4CH digital display
1H3000.0 1H3000.0
3H3000.0 4H3000.0
1CH digital + 4CH bargraph display
1H-1999.9ABCDEF
DI/DO display
Remote control inputs
Alarm output relays
Tag_2CH digital display
abcdefgH 200.0mV
jkmnpqr 200.0mV
System display
100mm Dot Model
Analog:6
Switches the displayed contents every
3 seconds. Displays number of measurement
inputs, optional functions, version number, etc.
Skip
No display type is registered. Skips the screen
during screen switching.
key.
key.
).
(Pen model)
45