Printing The Recorder Settings - YOKOGAWA mR10000 436101 User Manual

Printing the Recorder Settings

IM 04P01B01-02E
Aborting the Manual Printout
1.
Press the
FUNC
2.
Press the key to select Print out and then press the
3.
Press the key with Manual Stop shown on the screen.
Manual printout stops. The screen returns to the data display screen.
Print=Manual Stop
This section explains the procedure for printing the recorder settings. There are two sets
of settings that can be printed: List and Setup.
List: Prints the settings of Setting mode (input range for each channel, etc.)
Setup: Prints the settings of Basic Setting mode
Note
• The printout takes several minutes to tens of minutes to complete.
• When printout is executed, trend recording is suspended. However, the recorder continues
the measurement and alarm detection (in the background).
• When printout is complete, trend recording resumes.
• If an alarm occurs during the printout, the alarm is printed after the recording resumes.
Starting the List Printout
1.
Press the
FUNC
2.
Press the key to select Print out and then press the
Func=Print out
3.
Press the key to show List Start and then press the
The List printout starts. The screen returns to the data display screen.
Print=List Start
Aborting the List Printout
1.
Press the
FUNC
2.
Press the key to select Print out and then press the
3.
Press the key to show List Stop and then press the
The List printout stops. The screen returns to the data display screen.
Print=List Stop
Starting/Stopping the Setup Printout
Setup printout can be started/stopped in a similar fashion to List printout. For Setup
printout, select Setup Start and Setup Stop.
* When the key or
reversed as when the respective key is pressed by itself.
key.
Printout example of List on the pen model
key.
key.
key is pressed while holding down the SHIFT key, the operation is
Recording/Displaying Data
key.
key.
key.
key.
key.
47