Switching The Display Screen - YOKOGAWA mR10000 436101 User Manual

Recording/Displaying Data

Switching the Display Screen

44
The screen switches each time the
switched in order. Screens that are set to "Skip" (See "Display Types" on the next page)
are skipped. Below is a display example.
Display Example (1-channel digital + bar graph display)
Channel No.
Alarm status Measured value
Bar graph
• Channel Auto Switching
On screens that show the measured values and computed values, the displayed
channel is automatically switched in ascending order. The switching interval can be
set to 1 s, 2 s, 3 s, 4 s, or 5 s.
• Switching the Displayed Channel Using Keys
If Manual switching is specified, the channel switches each time the
pressed in ascending order. All channels are displayed in order.
Display Example (Flag Display)
Flag (the number indicates the channel No.)
Display Example (Alarm Status Display)
Symbol indicating
an alarm
Computation
channel
Channel on which an alarm is not set
Display Example (Date/Time and Chart Speed Display)
The date format can be specified.
Date
A u g . 3 1 . 2 0 0 5 1 2 0 0 0
1 1 : 2 6 : 3 7
Time
Display Example (Status Display)
Alarm status
Remaining amount of chart paper is less than approx. 2 cm (/F1 option)
DISP key is pressed. Screen 01 through 15 are
Unit
Scale
Alarm point mark
Scale
Measurement channel
Channel on which an alarm is occurring
Channel on which an alarm is not occurring
m m / h
Chart speed
key is
CH UP
IM 04P01B01-02E