YOKOGAWA mR10000 436101 User Manual page 12

Installing/Wiring the Recorder
Panel Mounting Diagram
External Dimensions
12
• Next, fix the recorder in place by tightening the attachment screws with the
appropriate torque. When the recorder is approximately perpendicular to
the panel as you fasten the screws, press the mounting bracket against
the case so that they are in contact with each other.
Tightening the screws too much can deform the case or damage the bracket.
Screw temporarily
(The figure shows the case when the mounting
brackets are used on the top and bottom of the case.)
(1.08) 27.5
151.5 (5.96)
144 (5.67)
144
(5.67)
151.5
(5.96)
CAUTION
Fix in place
Panel
Mounting bracket
Attachment
screw
Front
220 (8.66)
178 (7.01)
2 to 26
Mounting panel
thickness
Case
Panel
Mounting bracket
Torque driver
(flat blade)
Attachment screw
Unit: mm (approx. inch)
Unless otherwise specified, tolerance is ±3%
(however, tolerance is ±0.3 mm when below 10 mm).
9.4 (Dimensions before attaching
the mounting bracket)
(0.37)
+2
136.5
0
(5.37)
7.5
(Dimensions after attaching
(0.30) the mounting bracket)
In contact
with each other
IM 04P01B01-02E