Rear View - IBM eserver xSeries 440 8687 Hardware Maintenance Manual

Locator light: This blue light indicates the primary and secondary servers. This
light blinks on the primary server. If the light remains solid, it indicates that server is
the secondary server. See "Light path diagnostics" on page 54 for the exact location
of this light.
CD-ROM drive eject button: Push this button to release a CD-ROM drive from the
server.
CD eject button: Push this button to release a CD from the drive.
CD-ROM drive activity light: When this light is on, it indicates that the CD-ROM
drive is in use.
Diskette drive eject button: Push this button to release a diskette drive from the
server.
Diskette eject button: Push this button to release a diskette from the drive.
Diskette drive activity light: When this light is on, it indicates that the diskette
drive is in use.
Power supply latch: This latch is used to secure the power-supply in place.
Reset button: Press this button to reset the server and run the power-on self-test
(POST). You might need to use a pen or the end of a straightened paper clip to
press the button.
Power button: Press this button to manually turn the server on or off.

Rear view

SMP Expansion Port 1
System power connectors (1 and 2): The system power cords are connected to
these two connectors to provide power to the system.
RXE Expansion Port (B): Use this port to connect the server to a remote I/O
enclosure (models 1RX, 2RX, 3RX, 4RX, 5RX, 6RX, 7RX, 3RY, 4RY only) when
two SMP Expansion Modules are installed.
8
xSeries 440 Type 8687: Hardware Maintenance Manual
System power
System power
connector (1) connector (2)
SMP Expansion Port 2
SMP Expansion Port 3
SCSI port
RXE Management Port
RXE Expansion Port (B)
Auxiliary pointing
device connector
Keyboard port
USB 1
USB 2
Video port
Remote
Supervisor
Adapter
ports
Ethernet
activity light
Ethernet
link light
Gigabit Ethernet
port
RXE Expansion
Port (A)