1. Manuals
  2. Brands
  3. IBM Manuals
  4. Server
  5. xSeries 445 Type 8870
  6. User manual

IBM xSeries 445 8870 User Manual

Hide thumbs Also See for xSeries 445 8870:
Table of Contents

Advertisement

Quick Links

Download this manual
ERserver
xSeries 445 Type 8870
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for IBM xSeries 445 8870

Summary of Contents for IBM xSeries 445 8870

  • Page 1 ERserver xSeries 445 Type 8870 User’s Guide...
  • Page 3 ERserver xSeries 445 Type 8870 User’s Guide...
  • Page 4 63, and Appendix C, “Notices”, on page 75. First Edition (June 2003) © Copyright International Business Machines Corporation 2003. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

  • Page 5: Table Of Contents

    Memory mirroring ..... . . 8 IBM Director ......8 The UpdateXpress program .
  • Page 6 Purchasing additional services ....65 IBM Statement of Limited Warranty Z125-4753-06 8/2000 ..66 Part 1 - General Terms ..... 66 Part 2 - Country-unique Terms .

  • Page 7: Safety

    Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. Antes de instalar este produto, leia as Informações sobre Segurança. © Copyright IBM Corp. 2003...
  • Page 8 Antes de instalar este producto, lea la información de seguridad. Läs säkerhetsinformationen innan du installerar den här produkten. Statement 1: DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm.
  • Page 9 Statement 2: CAUTION: When replacing the lithium battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer.
  • Page 10 Statement 4: ≥ 18 kg (39.7 lb) ≥ 32 kg (70.5 lb) ≥ 55 kg (121.2 lb) CAUTION: Use safe practices when lifting. Statement 5: CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device.
  • Page 11 Statement 8: CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components.
  • Page 12 WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.

  • Page 13: Chapter 1. Introducing The Ibm Xseries 445 Server

    The xSeries 445 server comes with a limited warranty. You can obtain up-to-date information about your xSeries 445 model and other IBM server products at http://www.ibm.com. Your xSeries 445 server contains several IBM Enterprise X-Architecture technologies, that help increase performance and reliability.

  • Page 14: Related Publications

    This printed publication contains instructions for setting up your server and basic instructions for installing some options. v Option Installation Guide This publication is in PDF on the IBM xSeries Documentation CD. It contains detailed instructions for installing, removing, and connecting optional devices that your server supports.

  • Page 15: Notices And Statements Used In This Book

    Notices and statements used in this book The caution and danger statements used in this book also appear in the multilingual Safety Information book provided on the IBM xSeries Documentation CD. Each caution and danger statement is numbered for easy reference to the corresponding statement in the safety book.

  • Page 16: Features And Specifications

    – Server off: -40° to 60° C ™ v Compatible with SVGA v IBM XA-32 chip set with integrated memory, (-104° to 140° F). Maximum altitude: 2133 m v 8 MB SDRAM video memory at 125 MHz I/O, system cache, and remote I/O controllers (6998.0 ft).

  • Page 17: What Your Server Offers

    IBM Director IBM Director is a workgroup-hardware-management tool that you can use to centrally manage xSeries servers. For more information about IBM Director, see the IBM Director User’s Guide on the IBM Director CD.
  • Page 18 v Integrated network support Your server comes with an integrated Broadcom 5704 Dual Gigabit Ethernet controller, which supports connection to a 10-Mbps, 100-Mbps, or 1000-Mbps network. For more information, see “Configuring the Gigabit Ethernet controller” on page 29. v Large data-storage capacity and hot-swap capability Your server supports up to two 25.4-mm (1-inch) slim-high, 3.5-inch hot-swap hard disk drives in the hot-swap bays.

  • Page 19: Reliability, Availability, And Serviceability Features

    Standby voltage for systems-management features and monitoring v System error logging v Vital product data (VPD) (includes information stored in nonvolatile memory for easier remote viewing) ® v Wake on LAN capability Chapter 1. Introducing the IBM xSeries 445 server...

  • Page 20: Active Memory

    To support memory mirroring, you must install identical dual inline memory modules (DIMMs) in memory port 1 and memory port 2. For more information, see the section about installing memory modules in the Option Installation Guide on the IBM xSeries Documentation CD.

  • Page 21: The Updatexpress Program

    Increased productivity of IT personnel and users v Reduced service and support costs For more information about IBM Director, see the IBM Director CD that comes with your server, the IBM Director publications on the CD, and the following Web pages: Systems Management - Director Package http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-...

  • Page 22: Server Controls, Leds, And Power

    LED. During typical operation, both the ac and dc power LEDs are lit. For any other combination of LEDs, see the Hardware Maintenance Manual and Troubleshooting Guide on the IBM xSeries Documentation CD. Hard disk drive activity LED: When this green LED is on, it indicates that the hard disk drive is in use.
  • Page 23 Power-control button: Press this button to turn the server on and off manually. A power-control-button shield comes with your server. You can install this disk-shaped shield to prevent the server from being turned off accidentally. Chapter 1. Introducing the IBM xSeries 445 server...

  • Page 24: Rear View

    Rear view RXE Expansion Port B System power System power Mouse connector connector 2 connector 1 Keyboard connector Remote Supervisor Adapter connectors and LEDs Gigabit Ethernet connector Upper Ethernet status LED Lower Ethernet SMP Expansion Port 1 status LED SMP Expansion Port 2 Gigabit Ethernet SMP Expansion Port 3 connector...
  • Page 25 Modules together in 16-way configurations. SMP Expansion port 2: This port is used to interconnect two SMP Expansion Modules together. SMP Expansion port 1: This port is used to interconnect two SMP Expansion Modules together. Chapter 1. Introducing the IBM xSeries 445 server...

  • Page 26: Server Power Features

    If both servers do not turn on when either power-control button is pressed, see the Hardware Maintenance Manual and Troubleshooting Guide on the IBM xSeries Documentation CD. xSeries 445 Type 8870: User’s Guide...

  • Page 27: Turning Off The Server

    You can turn off the server through a request from the service processor. Note: In a 16-way configuration, when you press the power-control button on either the primary or secondary server, both servers will be turned off. If both Chapter 1. Introducing the IBM xSeries 445 server...
  • Page 28 Hardware Maintenance Manual and Troubleshooting Guide on the IBM xSeries Documentation CD. xSeries 445 Type 8870: User’s Guide...

  • Page 29: Chapter 2. Configuring The Server

    Ensure that options or settings on the secondary server are correct before creating a scalable partition. v IBM ServerGuide Setup and Installation CD The ServerGuide program provides software-setup tools and installation tools that are designed for your server. Use this CD during the installation of your...

  • Page 30: Using The Configuration/Setup Utility Program

    “Using the PXE boot agent utility program” on page 50. v ServeRAID Manager ServeRAID Manager is available as a stand-alone program and as an IBM Director extension. If a ServeRAID adapter is installed in your server or if you are...
  • Page 31 When you make configuration changes through other options in the Configuration/Setup Utility program, the changes are reflected in the system summary; you cannot change settings directly in the system summary. This choice is on the full and limited Configuration/Setup Utility menu. v System Information Select this choice to view information about your server.
  • Page 32 If you set an administrator password and then forget it, there is no way to change, override, or remove it. You must replace the system board. This choice is on the Configuration/Setup Utility menu only if an IBM Remote Supervisor Adapter is installed.
  • Page 33 Select this choice to view a summary of current scalable partition settings and to configure or delete partition settings. Notes: 1. Partition settings are called partition descriptors in some IBM documentation. 2. See “Configuring scalable partitions” on page 58″ for more information on creating, deleting, and configuring scalable partitions.
  • Page 34 Additional Configuration/Setup Utility menu choices With the IBM Remote Supervisor Adapter in your server, you can view the following additional menu choices: v System Card Data Select this choice to display information about your server.

  • Page 35: Remote Console Redirection

    Remote console redirection From the Devices and I/O Ports choice, you can enable and configure the remote console redirection through the Remote Console Redirection submenu. The Devices and I/O Ports choice is on the full Configuration/Setup menu only. Complete the following steps to enable and configure the remote console redirection feature: 1.

  • Page 36: Passwords

    Passwords From the System Security choice, you can set, change, and delete a power-on password and an administrator password. The System Security choice is on the full Configuration/Setup menu only. Note: In a 16-way configuration security settings are defined through the primary server.

  • Page 37: Using The Serverguide Setup And Installation Cd

    Configuration/Setup Utility menu. You can use any combination of up to seven characters (A–Z, a–z, and 0–9) for the password. The Administrator password choice is on the Configuration/Setup Utility menu only if an IBM Remote Supervisor Adapter is installed.

  • Page 38: Setup And Configuration Overview

    Setup and configuration overview When you use the ServerGuide Setup and Installation CD, you do not need setup diskettes. You can use the CD to configure any supported IBM server model. The ServerGuide program checks your system BIOS, service processors, and other system hardware to determine if system updates are available.

  • Page 39: System Partition

    Notes: 1. Plug and Play adapters are configured automatically. Non-Plug and Play adapters or non-IBM adapters might require switch settings, additional device drivers, and installation after the operating system is installed. See the documentation that comes with the adapter.

  • Page 40: Setting Up Or Updating Multiple Servers

    3. With some operating-system installations, you can create an operating-system replication diskette for setting up additional servers. This diskette contains the Internet protocol (IP) address, server name, and other selections. 4. The ServerGuide program presents operating-system partition options that are based on your operating-system selection and the installed hard disk drives.

  • Page 41: Installing Your Operating System Without Serverguide

    If you have already configured the server hardware and you decide not to use the ServerGuide program to install your operating system, complete the following steps to download the latest operating-system installation instructions from the IBM Support Web page: 1. Go to http://www.ibm.com/pc/support/.

  • Page 42: Using The Integrated System Management Firmware Update Utility Program

    To update the integrated system management firmware for the integrated system management processor (ISMP), download the Integrated System Management Firmware Update Utility program for your server from the IBM Support Web site at http://www.ibm.com/pc/support/. Run the Integrated System Management Firmware Update Utility program to create a diskette to use to update the firmware.

  • Page 43: Using The Lsi Logic Configuration Utility Program

    Using the LSI Logic Configuration Utility program Use the LSI Logic Configuration Utility program to: v Perform a low-level format of a SCSI hard disk drive v Set a SCSI device scan order v View or change SCSI IDs for attached devices v Create a mirrored pair of SCSI hard disk drives with or without a hot-spare drive v Set SCSI protocol parameters on SCSI hard disk drives The integrated SCSI controller with RAID capabilities supports redundant array of...

  • Page 44: Creating A Mirrored Pair Of Scsi Hard Disk Drives

    (ASM) network so that you can manage the server from a remote location. For more detailed information, see the Remote Supervisor Adapter User’s Guide on the IBM xSeries Documentation CD. Remote Supervisor Adapter features The Remote Supervisor Adapter has the following features: v Continuous health monitoring and control ®...

  • Page 45: Using The Documentation

    The documentation for the Remote Supervisor Adapter includes the following publications on the IBM Documentation CD. v IBM Eserver xSeries 445 User’s Guide (this document, specifically the topics in this section, which assist you with the cabling and configuring). v IBM Remote Supervisor Adapter User’s Guide...
  • Page 46 Task 2. Perform the initial configuration to enable remote access to the Remote Supervisor Adapter. So that you can: v Configure the Ethernet port v Configure the management (COM) port v Set up the point-to-point protocol See “Enabling remote access to the adapter” on page 35. Task 3.
  • Page 47 Note: For detailed information about using the ASM Web interface and the text-based user interface, see the Remote Supervisor Adapter User’s Guide on the IBM xSeries Documentation CD. Chapter 2. Configuring the server...
  • Page 48 Table 3. Configuration tasks to enable remote access to the Remote Supervisor Adapter User interface to Remote Connection to Remote For the configuration Supervisor Adapter Supervisor Adapter procedure, see: ASM Web interface using LAN using the Ethernet port “Configuring the Ethernet HTTP settings for Web-based remote access”...
  • Page 49 ASMA<burned-in MAC address>. For detailed information about the Ethernet settings, see the Remote Supervisor Adapter User’s Guide on the IBM Documentation CD. 5. Change the DHCP Setting field to Disabled. The default value is Enabled. 6. Press F6 to apply the change.
  • Page 50 Configuring the management port for text-based remote access: Complete the following steps to configure the Remote Supervisor Adapter management port for access using a modem or null modem. If you completed the procedure for configuring the Ethernet port and the Configuration Settings window is open, go to step 3 1.
  • Page 51 Note: The data bits value is preset to 8 and cannot be changed. For detailed information about the management port and modem settings, see the Remote Supervisor Adapter User’s Guide on the IBM Documentation CD. 5. If you made changes to the management port settings, press F6 to apply the change.
  • Page 52 For detailed information about the PPP settings, see the information about configuring PPP access over a management port in the Remote Supervisor Adapter User’s Guide on the IBM Documentation CD. 5. Press F6 to apply the changes. 6. Press Esc. After the Warning window opens, press Enter to restart the Remote Supervisor Adapter.
  • Page 53 Hardware Wizard by selecting Cancel. ® 2. If IBM Netfinity Director, IBM Director, or UM Services is running on the server, stop the system-management application before proceeding. Complete the following steps to manually install the Windows 2000 ASM device drivers.
  • Page 54 The normal (interactive) method for installing the ASM device drivers prompts you with instructions and waits for you to respond before continuing with the installation. Note: If IBM Netfinity Director, IBM Director, UM Services, or IBM Netfinity Manager is running on the server, stop the system-management application before proceeding.

  • Page 55: Using The Asm Interconnect Network

    10. Continue with “Completing the configuration”. Completing the configuration: To complete the configuration of the Remote Supervisor Adapter, see the Remote Supervisor Adapter User’s Guide on the IBM Documentation CD. Completing the configuration includes the following tasks: v Defining the login IDs and passwords...
  • Page 56 World Wide Web at http://www.ibm.com/pc/support/. For more information on updating firmware, see the IBM Remote Supervisor Adapter User’s Guide on the IBM xSeries Documentation CD. You must connect an ASM Interconnect module to the Remote Supervisor Adapter and to each xSeries 445 server that you connect to the ASM interconnect network bus.
  • Page 57 When alerts are generated, they are forwarded to the Remote Supervisor Adapter, ASM processor, or ASM PCI adapter on the ASM interconnect network that has the communication resources to forward the alert. If no system on the ASM interconnect network meets the requirements, the alert is set for transmission if the connection type is configured or becomes available later.
  • Page 58 Depending upon the servers you have, you might need additional ASM Interconnect modules or Category 5 or Category 3 Ethernet cables. The following table lists some IBM Netfinity and IBM xSeries products, and indicates whether you need to use an ASM Interconnect module to set up the ASM interconnect network.
  • Page 59 Figure 8. Connecting an ASM Interconnect module to an xSeries 445 server 2. Connect one or two Category 3 or Category 5 Ethernet cables to the other end of the ASM Interconnect module. 3. Continue with “ASM interconnect network configuration examples” on page 48. Chapter 2.
  • Page 60 ASM interconnect network configuration examples The illustrations in this section show sample ASM interconnect network configurations. The following illustration shows an Ethernet cable connecting the remote administrator system to the Remote Supervisor Adapter that is installed in an xSeries 445. Server 1 uses the LAN connection to forward system-management data generated by the other xSeries 445 server in the ASM interconnect network bus to the remote system-management administrator.
  • Page 61 The following illustration shows a modem connected to the management port of the Remote Supervisor Adapter in the xSeries 445 server on the left, a modem connected to the management port of the Remote Supervisor Adapter in the xSeries 445 server on the right, and a modem connected to the remote administrator system.

  • Page 62: Using The Pxe Boot Agent Utility Program

    “Power problems” in the “Error symptoms” section in the Hardware Maintenance Manual and Troubleshooting Guide on the IBM xSeries Documentation CD. xSeries 445 Type 8870: User’s Guide...

  • Page 63: Using Serveraid Manager

    Using ServeRAID Manager Use ServeRAID Manager, which is on the IBM ServeRAID Support CD, to: v Configure a redundant array of independent disks (RAID) v Restore a SCSI hard disk drive to the factory-default settings, erasing all data from the disk...
  • Page 64 Figure 11. “Configuration wizard” window In the Configuration wizard, you can select express configuration or custom configuration. Express configuration automatically configures the controller by grouping the first two physical drives in the ServeRAID Manager tree into an array and creating a RAID level-1 logical drive. If you select custom configuration, you can select the two physical drives that you want to group into an array and create a hot-spare drive.
  • Page 65 Figure 12. “Configuration summary” window 5. Click Apply; then, click Yes when asked if you want to apply the new configuration. The configuration is saved in the controller and in the physical drives. 6. Exit from ServeRAID Manager and remove the CD from the DVD-ROM drive. 7.
  • Page 66 Using custom configuration Complete the following steps to use custom configuration: 1. In the ServeRAID Manager tree, click the controller. 2. Click Custom configuration. 3. Click Next. The “Create arrays” window opens. Figure 13. “Create arrays” window 4. From the list of ready drives, select the two drives that you want to group into the array.
  • Page 67 Figure 14. “Configuration summary” window 7. Click Next. The “Configuration summary” window opens. 8. Review the information in the “Configuration summary” window. To change the configuration, click Back. 9. Click Apply; then, click Yes when asked if you want to apply the new configuration.

  • Page 68: Viewing The Configuration

    Viewing the configuration You can use ServeRAID Manager to view information about RAID controllers and the RAID subsystem (such as arrays, logical drives, hot-spare drives, and physical drives). When you click an object in the ServeRAID Manager tree, information about that object appears in the right pane.

  • Page 69: Getting Assistance

    Getting assistance For more information about ServeRAID Manager, see the online help system. To start the help system, click Help on the toolbar or select an item from the Help menu. Figure 16. ServeRAID Manager help menu The help system (ServeRAID Assist) will open within the ServeRAID Manager interface.

  • Page 70: Configuring Scalable Partitions

    Figure 17. Hints and tips feature Configuring scalable partitions The Scalable Systems Manager program, when available, is an extension to IBM Director that provides a graphical user interface for creating and managing scalable partitions. See the Scalable Systems Manager Installation and Users Guide for information on how to use that program to configure scalable partitions on xSeries 445 servers.

  • Page 71: Creating A Scalable Partition

    1. If you have not already done so, connect the RXE expansion and RXE management cables between the server and the remote expansion enclosure. See ″RXE Expansion Port cabling″ in the Option Installation Guide on the IBM xSeries Documentation CD.

  • Page 72: Deleting A Scalable Partition

    7. If necessary, remove the SMP Expansion cables and reconnect them according to your new configuration. See ″Conecitng the cables″ in the Option Installation Guide on the IBM xSeries Documentation CD. 8. Restart the servers. xSeries 445 Type 8870: User’s Guide...

  • Page 73: Appendix A. Getting Help And Technical Assistance

    If you need help, service, or technical assistance or just want more information about IBM products, you will find a wide variety of sources available from IBM to assist you. This appendix contains information about where to go for additional information about IBM and IBM products, what to do if you experience a problem ®...

  • Page 74: Software Service And Support

    You can find service information for your IBM products, including supported options, at http://www.ibm.com/pc/support/. Software service and support Through IBM Support Line, you can get telephone assistance, for a fee, with usage, configuration, and software problems with xSeries servers, IntelliStation workstations, and appliances. For information about which products are supported by Support Line in your country or region, go to http://www.ibm.com/services/sl/products/.

  • Page 75: Appendix B. Warranty Information

    1. parts and labor during the first year of the warranty period 2. parts only, on an exchange basis, in the second and third years of the warranty period. IBM will charge you for any labor it provides in performance of the repair or replacement.

  • Page 76: Warranty Service And Support

    IBM hardware repair - If the problem is determined to be caused by IBM hardware under warranty, trained service personnel are available to provide the applicable level of service, either on-site or at an IBM service center as determined by IBM.

  • Page 77: Purchasing Additional Services

    International Warranty Service (IWS) is available during the warranty period. Eligible IBM systems are identified by their four-digit machine types. You can obtain IWS through the service delivery method (such as depot, carry-in, or on-site) provided in the servicing country or region. Service methods and procedures vary by country or region, and some service or parts might not be available in all countries and regions.

  • Page 78: Ibm Statement Of Limited Warranty Z125-4753-06 8/2000

    Country-unique Terms. The terms of Part 2 replace or modify those of Part 1. The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them.
  • Page 79 IBM or your reseller of changes in a Machine’s location. IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges.

  • Page 80: Part 2 - Country-Unique Terms

    “Machine” includes Machine Code and Licensed Internal Code. This limit also applies to IBM’s suppliers and your reseller. It is the maximum for which IBM, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES (OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE);...
  • Page 81 Limitation of Liability: The following is added to this Section: Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974 or other similar legislation, IBM’s liability is limited to the repair or replacement of the goods or the supply of equivalent goods.
  • Page 82 PEOPLE’S REPUBLIC OF CHINA (PRC) Governing Law: The following replaces this Section: Both you and IBM consent to the application of the laws of the State of New York (except when local law requires otherwise) to govern, interpret, and enforce all your and IBM’s rights, duties, and obligations arising from, or relating in any manner to,...
  • Page 83 Machine in any of those countries from either (1) an IBM reseller approved to perform warranty service or (2) from IBM. If you purchase an IBM Machine in a Middle Eastern or African country, you may obtain warranty service for that Machine from the IBM entity within the country of...
  • Page 84 The minimum warranty period for Machines is six months. In case IBM or your reseller is unable to repair an IBM Machine, you can alternatively ask for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and get your money refunded.
  • Page 85 2. as to any other actual damage arising in all situations involving nonperformance by IBM pursuant to, or in any way related to the subject matter of this Statement of Warranty, IBM’s liability, will be limited to the total amount you paid for the Machine that is the subject of the claim.
  • Page 86 The following item is added to this paragraph: 3. breach of IBM’s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982. Applicability of suppliers and resellers (unchanged).

  • Page 87: Appendix C. Notices

    Web sites. The materials at those Web sites are not part of the materials for this IBM product, and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

  • Page 88: Trademarks

    OS/2 WARP Lotus, Lotus Notes, SmartSuite, and Domino are trademarks of Lotus Development Corporation and/or IBM Corporation in the United States, other countries, or both. ActionMedia, LANDesk, MMX, Pentium, and ProShare are trademarks of Intel Corporation in the United States, other countries, or both.

  • Page 89: Product Recycling And Disposal

    IBM makes no representations or warranties with respect to non-IBM products. Support (if any) for the non-IBM products is provided by the third party, not IBM. Some software may differ from its retail version (if available), and may not include user manuals or all program functionality.

  • Page 90: Industry Canada Class A Emission Compliance Statement

    Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.

  • Page 91: Taiwanese Class A Warning Statement

    Japanese Voluntary Control Council for Interference (VCCI) statement Power cords For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
  • Page 92 The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. IBM power cords for a specific country or region are usually available only in that country or region.
  • Page 93 IBM power cord part number Used in these countries and regions 36L8880 Argentina, Paraguay, Uruguay 49P2078 India 49P2110 Brazil 6952300 Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Caicos Islands, Canada, Cayman Islands, Colombia, Costa Rica, Cuba, Dominican Republic, Ecuador, El...
  • Page 94 xSeries 445 Type 8870: User’s Guide...

  • Page 95: Index

    4 documentation memory mirroring 8 Remote Supervisor Adapter 33 memory module specifications 4 DOS configuration utility 35 Memory ProteXion 5, 8 drives 6 memory scrubbing 8 DVD-ROM microprocessor 6 drive specification 4 microprocessor specifications 4 © Copyright IBM Corp. 2003...
  • Page 96 mouse connector 12 ServeRAID Manager Configuration wizard (illus.) 52 online help 57 ServerGuide notes, important 76 features 26 notices operating system installation 27 electronic emission 77 setting up multiple servers 28 FCC, Class A 77 setup and installation CD 17 using 25 ServerGuide CD 5 serviceability 7...
  • Page 98 Part Number: 02R2728 Printed in U.S.A. (1P) P/N: 02R2728...

Table of Contents