Rear View - IBM xSeries 445 8870 User Manual

Rear view

SMP Expansion Port 1
Figure 2. Rear view of xSeries 445
System power connectors (1 and 2): The system power cords are connected to
these two connectors to provide power to the system.
RXE Expansion Port B: Use this port to connect the server to a remote I/O
enclosure when two SMP Expansion Modules are installed.
Mouse connector: Connect a mouse or other PS/2
Keyboard port: Signal cables for a keyboard are connected to the keyboard port.
Remote Supervisor Adapter connectors and LEDs: This group of connectors
and LEDs located on the back of the server are used for system management
information and control.
External power
connector
Figure 3. Remote Supervisor Adapter
v External power connector - This connector is not supported on this server.
12
xSeries 445 Type 8870: User's Guide
System power System power
connector 2
connector 1
SMP Expansion Port 2
SMP Expansion Port 3
SCSI connector
RXE Management Port
Error LED
(amber)
Power LED
(green)
RXE Expansion Port B
Mouse connector
Keyboard connector
USB 1
USB 2
Video connector
Ethernet activity LED
(green)
ASM interconnect
port
Management port
Remote
Supervisor
Adapter
connectors
and LEDs
Gigabit Ethernet
connector
Upper Ethernet
status LED
Lower Ethernet
status LED
Gigabit Ethernet
connector
RXE Expansion
Port (A)
®
device to this connector.
Ethernet link LED
(green)
10/100
Ethernet port