7. To replace the I/O board, reverse the previous steps.
Riser card and Remote Supervisor Adapter
This section illustrates the location of connectors and LEDs on the Remote
Supervisor Adapter, and provides instructions for replacement of the Remote
Supervisor Adapter and riser card.
Remote Supervisor Adapter component locations
The following illustration identifies the connectors and lights on the Remote
Supervisor Adapter.
External power
supply connector
c. Pull the Remote Supervisor Adapter out of the riser card, disconnecting any
cables, and set it in a safe place.
d. Pull the riser card out of the I/O board, disconnecting any cables.
Ethernet activity
LED (green)
Error LED
(amber)
Management
Power LED
port
(green)
ASM Interconnect port
(RJ-14)
Lithium
battery
Ethernet link
LED (green)
Ethernet port
(RJ-45)
FRU information (service only)
135