Speaker Settings Menu - Sony STR-DN1010 Operating Instructions Manual

To register settings for the
listening environment
You can select the seating position you want
and register the measurement results of the
Auto Calibration for that seating position.
1
Press V/v repeatedly to select
"Position", then press
2
Press V/v repeatedly to select the
position (Position 1, 2, 3) for which you
want to register the measurement
result, then press
3
Press V/v repeatedly to select "Auto
Cal. Start", then press
The measurement results is registered as
the position you selected in step 2.
4
Press to select "START".
5
Repeat step 1 to 3 to register another
seating position.
To select the registered seating
position
1
Press V/v repeatedly to select
"Position", then press
2
Press V/v repeatedly to select the
position (Position 1, 2, 3) you want,
then press .
The registered seating position is selected.
Name Input (Naming position)
You can rename the position name.
1
Select the "Position" for which you want
to name.
2
Press V/v repeatedly to select "Name
Input", then press
3
Press V/v/B/b to select a character,
then press .
The name you entered is registered.
or b.
.
or b.
or b.
or b.

Speaker Settings menu

You can adjust each speaker manually.
You can also adjust the speaker levels after the
Auto Calibration is completed.
Note
The speaker settings are only for the current seating
position.
SP Pattern (Speaker pattern)
Select "SP Pattern" according to the speaker
system which you are using. You do not need
to select the speaker pattern after Auto
Calibration.
1
Press V/v repeatedly to select
"SP Pattern", then press
The "SP Pattern" screen appears.
2
Press V/v repeatedly to select the
speaker pattern you want, then press
.
3
Press RETURN/EXIT O.
SB Assign (Surround back
speaker assign)
You can make settings for the surround back
speaker(s) or front high speaker(s). Before you
change "SB Assign" to "BI-AMP" or
"Speaker B", be sure you have set "SP
Pattern" to a setting without surround back
speakers or front high speakers.
• Speaker B
If you connect an additional front speaker
system to the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/FRONT B
terminals, select "Speaker B".
• BI-AMP
If you connect front speakers to the
SPEAKERS SURROUND BACK/FRONT
HIGH/BI-AMP/FRONT B terminals using a
bi-amplifier connection, select "BI-AMP".
or b.
continued
GB
91