Sony STR-DN1010 Operating Instructions Manual page 12

Indicator and explanation
K SLEEP
Lights up when the Sleep Timer is activated.
L LPCM
Lights up when Linear PCM (Pulse Code
Modulation) signals are decoded.
M DTS(-ES) indicators
Lights up one of the respective indicators when
the receiver is decoding the corresponding DTS
format signals.
DTS
DTS-ES
DTS 96/24
Note
When playing a DTS format disc, be sure that
you have made digital connections and that
INPUT MODE is set to "AUTO" (page 84).
N Tuning indicators
Lights up when the receiver tunes in radio
stations, or satellite radio stations.
RDS (Models of area code CEK, ECE,
AU1, TW2 only)
A station that provides RDS services is tuned in.
CAT (Models of area code U2, CA2 only)
The category mode is selected during the
satellite radio operation.
MEM
A memory function, such as Preset Memory
(page 55), etc., is activated.
SIRIUS (Models of area code U2, CA2
only)
The SiriusConnect Home tuner is connected and
"SR" is selected.
ST
Stereo broadcast
O EQ
Lights up when the equalizer is activated.
P D.RANGE
Lights up when dynamic range compression is
activated (page 94).
Q
Lights up when the disc being played back
contains an LFE (Low Frequency Effect)
channel and the LFE channel signal is actually
being reproduced.
GB
12
DTS
DTS-ES
DTS 96 kHz/24 bit
Indicator and explanation
R Playback channel indicators
The letters (L, C, R, etc.) indicate the channels
being played back. The boxes around the letters
vary to show how the receiver downmixes or
upmixes the source sound (based on the speaker
pattern settings).
LH
RH
L
R
C
SL
SR
S
SBL
SBR
SB
Front Left High
Front Right High
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components
obtained by Pro Logic
processing)
Surround Back Left
Surround Back Right
Surround Back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO