Connecting A Blu-Ray Disc Player - Sony STR-DN1010 Operating Instructions Manual

Connecting a Blu-ray disc player

The following illustration shows how to connect a Blu-ray disc player.
Video signals
A
A Component video cord (not supplied)
B Video cord (not supplied)
C Audio cord (not supplied)
D Optical digital cord (not supplied)
E Coaxial digital cord (not supplied)
Notes
• The initial setting of the COMPONENT VIDEO
IN 1 jacks are Blu-ray disc player. If you want to
connect your Blu-ray disc player to the
COMPONENT VIDEO IN 2 or IN 3 jacks, set
"Input Assign" in the Input Option menu (page 85).
• To input multi channel digital audio from the
Blu-ray disc player, set the digital audio output
setting on the Blu-ray disc player. Refer to the
operating instructions supplied with the Blu-ray
disc player.
GB
30
Blu-ray disc player
Audio signals
B C
*
D E
Recommended connection
Alternative connection
* When you connect a component equipped with an
COAXIAL jack, set "Input Assign" in the Input
Option menu (page 85).