Surround Settings Menu - Sony STR-DN1010 Operating Instructions Manual

Tips
• Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the
dynamic range information included in the Dolby
Digital signal.
• "STD" is the standard setting, but it only enacts
light compression. Therefore, we recommend
using the "MAX" setting. This greatly compresses
the dynamic range and lets you view movies late at
night at low volumes. Unlike analog limiters, the
levels are predetermined and provide a very natural
compression.
Distance Unit
Lets you select the unit of measure for setting
distances.
x FEET
The distance is displayed in feet.
x METER
The distance is displayed in meters.

Surround Settings menu

You can adjust the sound effect on the
"S.F. Select" screen.
Note
The setup items you can adjust on each menu vary
depending on the sound field.
S.F. Select (Sound field select)
You can select the surround sound field and
adjust the effect level on the "S.F. Select"
screen.
For details on the sound field, see "Enjoying
Surround Sound" (page 65).
To select the surround sound
field
1
Press V/v repeatedly to select
"S.F. Select", then press
2
Press V/v repeatedly to select
surround sound you want, then press
.
To adjust the effect level
1
Press V/v repeatedly to select
"S.F. Select", then press
2
Press V/v repeatedly to select
surround sound you want, then press
or b.
Note
Effect Level adjustment is valid only when
"Cinema St EX D CS " is selected.
3
Press V/v repeatedly to select effect
level you want, then press
• MAX
• STD
• MIN
or b.
or b.
.
GB
95