Stabilizing S-Air Reception - Sony STR-DN1010 Operating Instructions Manual

4
Press V/v repeatedly to select
"RF Change", then press
b.
5
Press V/v repeatedly to select
the setting you want, then
press .
• AUTO: Normally select this. The
system changes "RF Change" to "ON"
or "OFF" automatically.
• ON: The system transmits sound by
searching for a better channel for
transmitting.
• OFF: The system transmits sound by
fixing the channel for transmitting.
6
Press GUI MODE.
The GUI menu turns off.
7
When you set "RF Change" to
"OFF", select the ID so that
sound transmission is most
stable.
Notes
• In most cases, you will not need to change this
setting.
• If "RF Change" is set to "OFF", transmission
between the S-AIR main unit and S-AIR sub unit
can be performed using one of the following
channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).
GB
82
Stabilizing S-AIR
or
reception
Check the following when S-AIR reception is
poor or unstable.
– Confirm the wireless adapters are inserted
correctly (page 35).
– Confirm that the S-AIR IDs of the S-AIR
main unit and sub unit are the same
(page 77).
When S-AIR reception is poor
Check the following.
• Keep cords that are connected to the S-AIR
product (AC power cord (mains lead),
speaker cords, or other cords) away from the
wireless adapter and slot.
• Keep as much space as possible around
S-AIR products.
– Avoid placing S-AIR products on top of or
directly below other electronic equipment.
– Avoid placing S-AIR products in a closed
rack, metal rack or under a table.