Sony STR-DN1010 Operating Instructions Manual page 42

4
Select the Auto Calibration
Type.
Press V/v repeatedly to select "Auto Cal.
Type", then press
Auto Calibration
Auto Cal. Type
Full Flat
Engineer
Front Reference
Off
RETURN
Calibration type and explanation
Full Flat
Makes the measurement of frequency from
each speaker flat.
Engineer
Sets the frequency to one that matches that of
the Sony listening room standard.
Front Reference
Adjusts the characteristics of all the speakers
to match the characteristics of the front
speaker.
Off
Sets the Auto Calibration to off.
5
Disconnect the optimizer
microphone after you have
finished.
Note
If you have reposition your speaker, we recommend
that you perform Auto Calibration again to enjoy the
surround sound.
Tip
The size of a speaker ("Large"/"Small") is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker Settings menu. Save the measurement
results first, then try to change the settings if you
want.
GB
42
.