Using The Setting Menu - Sony STR-DN1010 Operating Instructions Manual

Using the setting menu

You can adjust various settings for speakers,
surround effects, etc. using the setting menu.
To display the menu of the receiver on the TV
screen, make sure that the receiver is in "GUI
MODE" by following the steps in "To turn
"GUI MODE" on and off" (page 44).
RETURN/
EXIT O
1
Press GUI MODE.
After "MENU ON" appears on the
display for a while, "GUI" appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
BD
Input
DVD
SAT/CATV
Music
TV
VIDEO 1
Video
2
Press V/v repeatedly to select
"Settings", then press
to enter the menu mode.
The Setting menu list appears on the TV
screen.
GUI MODE
V/v/b,
3
Press V/v repeatedly to select
MENU
the menu item you want, then
press
Example: When you select "Auto Cal.".
4
Press V/v repeatedly to select
the parameter you want, then
press
To return to the previous screen
Press RETURN/EXIT O.
To exit the menu
Press MENU.
Note
appears for models of area code U2, CA2 only.
SR
Auto Cal.
AM
AM
Speaker
SR
Surround
SR
EQ
Settings
Audio
or b.
Auto Cal.
Speaker
Surround
EQ
Settings
Audio
or b.
continued
or b
GB
89