Tuning Into A Station - Sony STR-DN1010 Operating Instructions Manual

Tuning into a station

automatically (Auto Tuning)
1
Press GUI MODE.
After "MENU ON" appears on the
display for a while, "GUI" appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
"FM" or "AM", then press
b.
The FM or AM menu list appears on the
TV screen.
3
Press V/v repeatedly to select
"Auto Tuning", then press
or b.
4
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 54), or select the preset station you
want (page 55).
2
Press TOOLS/OPTIONS.
3
Press V/v repeatedly to select "FM Mode",
then press or b.
4
Press V/v repeatedly to select "MONO",
then press .
GB
54
Tuning into a station directly
(Direct Tuning)
You can enter the frequency of a station
directly by using the numeric buttons.
1
Press GUI MODE.
After "MENU ON" appears on the
display for a while, "GUI" appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
or
2
Press V/v repeatedly to select
"FM" or "AM", then press
b.
The FM or AM menu list appears on the
TV screen.
3
Press V/v repeatedly to select
"Direct Tuning", then press
or b.
4
Press SHIFT, then press
numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 (b 0*)
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
* Press 0 for models of area code CEK,
ECE, AU1, TW2 only.
Tip
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
5
Press
If you cannot tune in a station
"– – – .– – MHz" appears and then the screen
returns to the current frequency.
Make sure you have entered the right
frequency. If not, repeat step 4. If you still
cannot tune in a station, the frequency is not
used in your area.
.
or