Sony STR-DN1010 Operating Instructions Manual page 131

General
Power requirements
Area code Power requirements
U2, CA2 120 V AC, 60 Hz
ECE, CEK 230 V AC, 50/60 Hz
AU1 230 V AC, 50 Hz
TW2 110 V AC, 60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT: 5V, 0.7A MAX
Power consumption
Area code Power consumption
U2, CA2, CEK, 250 W
ECE, AU1, TW2
Power consumption (during standby mode)
0.9 W (When "Ctrl for
HDMI" and "S-AIR Stby"
are set to "OFF")
Dimensions (width/height/depth) (Approx.)
17 in × 6 1/4 in × 12 7/8 in
(430 mm × 157.5 mm ×
324.5 mm) including
projecting parts and
controls
Mass (Approx.) 18 lb 16 oz (8.6 kg)
For details on the area code of the
component you are using, see page 4.
Design and specifications are subject to
change without notice.
Halogenated flame retardants are not used in
the certain printed wiring boards.
GB
131