Sony STR-DN1010 Operating Instructions Manual page 106

Menu Parameters
[Display] [Display]
S-AIR settings S-AIR ID
[<S-AIR>] [S-AIR ID]
Pairing
[PAIRING]
S-AIR mode
[S-AIR MODE]
RF Change
[RF CHANGE]
S-AIR Standby
[S-AIR STBY]
a)
Depends on the speaker pattern setting, some parameters or settings may not be available.
b)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
c)
You can only select this parameter if "SP PATTERN" is not set to a setting with surround back or front high
speakers (page 91).
d)
"METER" for models of area code CEK, ECE, AU1 and TW2.
e)
You can only select this parameter if your speaker is set to "SMALL".
f)
You can only select this parameter if you select Cinema Studio A/B/C as sound field.
g)
This parameter is only available if the SiriusConnect Home tuner is connected to the SIRIUS jack on the
receiver.
h)
This parameter is only available when HDMI input is selected.
i)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
j)
"A.F.D. AUTO" for models of area code CEK, ECE, AU1 and TW2.
GB
106
i)
i)
i)
i)
i)
Settings
ID: A, ID: B, ID: C
START, CONDITION
PARTY, SEPARATE
RF AUTO, RF ON, RF OFF
STBY ON, STBY OFF
Initial
setting
ID: A
START
PARTY
RF AUTO
STBY OFF