4B: Connecting The Video Components - Sony STR-DN1010 Operating Instructions Manual

4b: Connecting the video components

Components to be connected
Connect your video components according to
the table below.
Component
Blu-ray disc player*
DVD player*
DVD recorder*
Satellite tuner*,
Cable TV tuner*
"PlayStation 3"
VCR
Camcorder, video game, etc.
* We recommend that you connect your video
components via HDMI connection if they have
HDMI jacks.
If you want to connect several
digital components, but cannot
find an unused input
See "Enjoying the sound/images from other
inputs" (page 85).
GB
26
Video input/output jacks to be
connected
The image quality depends on the connecting
jack. See the illustration that follows. Select
Page
the connection according to the jacks on your
27, 30
components.
27, 31
27, 31
27, 32
27
33
33
Converting video signals
This receiver is equipped with a function for
up-converting video signals. For details, see
"Function for conversion of video signals"
(page 34).
Notes
• Before connecting cords, be sure to disconnect the
AC power cord (mains lead).
• It is not necessary to connect all the cords. Connect
according to the availability of jacks on the
connected components.
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. If the power supply
of the receiver is not turned on, neither video nor
audio signals will be transmitted.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
COMPONENT VIDEO
Y
HDMI
P C
/
B B
P C
/
R R
Digital Analog
High quality image
VIDEO