Sony STR-DN1010 Operating Instructions Manual page 11

About the indicators on the display
1 2
x z
PL ll
LH SW RH
LF E
L R
C
SL S SR
SB L SB SB R
qk qj
Indicator and explanation
A
SW
Lights up when the audio signal is output from
the SUBWOOFER jack.
B Dolby Pro Logic indicators
Lights up one of the respective indicators when
the receiver performs Dolby Pro Logic
processing. This matrix surround decoding
technology can enhance input signals.
PL Dolby Pro Logic
PL II Dolby Pro Logic II
PL IIx Dolby Pro Logic IIx
PL IIz
Dolby Pro Logic IIz
Note
These indicators may not light up depending on
the speaker pattern setting.
C Input indicators
Light up to indicate the current input.
ANALOG
Lights up when
– INPUT MODE is set to "ANALOG".
– Sound Field is set to "Analog Direct".
– No digital signals are detected.
HDMI
The receiver recognizes a component connected
via an HDMI IN jack.
COAX
When INPUT MODE is set to "AUTO" and the
source signal is a digital signal being input
through the COAXIAL jack (page 84).
OPT
When INPUT MODE is set to "AUTO" and the
source signal is a digital signal being input
through the OPTICAL jack (page 84).
D ARC
Lights up when TV input is selected and the
Audio Return Channel (ARC) signals are
detected (page 100).
3
ANALOG HDMI COAX OPT
EQ RDS CAT
D.RANGE SIRIUS ST
qh qg qf
4 5
D + EX TrueHD NEO 6
ARC
MEM DTS – HD MSTR HI RES LBR
DTS –ES 96 24 LPCM SLEEP BI –AMP
qd qs
Indicator and explanation
E Dolby Digital Surround indicators
Lights up one of the respective indicators when
the receiver is decoding the corresponding
Dolby Digital format signals.
D
D EX
D+
TrueHD
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is set to "AUTO" (page 84).
F NEO:6
Lights up when DTS Neo:6 Cinema/Music
decoder is activated (page 66).
G DTS-HD indicators
Lights up one of the respective indicators when
the receiver is decoding the corresponding
DTS-HD format signals.
DTS-HD MSTR
DTS-HD HI RES
DTS-HD LBR
H S-AIR
Lights up when the S-AIR transmitter (not
supplied) is inserted.
I SP A/SP B/SP A B
Lights up according to the front speaker system
used (page 37).
However, these indicators do not light up if the
speaker output is turned off or if headphones are
connected.
J BI-AMP
Lights up when surround back speakers
selection is set to "BI-AMP" (page 88).
6 7 8 9
S –AIR
SP A B
qa q;
Dolby Digital
Dolby Digital Surround EX
Dolby Digital Plus
Dolby TrueHD
DTS-HD Master Audio
DTS-HD High Resolution
Audio
DTS-HD Low Bit Rate
Audio
continued
11
GB