Sony STR-DN1010 Operating Instructions Manual page 125

Hi-fi receivers: multi channel av receiver
Hide thumbs Also See for STR-DN1010:
Table of Contents

Advertisement

The GUI menu does not appear on the
TV screen.
• Press GUI MODE repeatedly to select
"MENU ON". If the GUI menu still does
not appear on the TV screen, press MENU.
• Check that the TV is connected correctly.
HDMI
The source sound input from the HDMI
jack on the receiver is not output from
the speakers connected to the receiver
or TV speaker.
• Check the setting of "Audio Out" in the
HDMI Settings menu (page 98).
• Check that the component is connected
correctly to the HDMI jack for that
component.
• You cannot listen to the Super Audio CD
by connecting HDMI.
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
• Be sure to use a High Speed HDMI cable
when you view images or listen to sound
during Deep Color (Deep Colour) or 3D
transmission.
The source image input to the HDMI
jack on the receiver is not output from
the TV.
• Make sure that cables are correctly and
securely connected to components.
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
• Be sure to use a High Speed HDMI cable
when you view images or listen to sound
during Deep Color (Deep Colour) or 3D
transmission.
The Control for HDMI function does not
work.
• Check the HDMI connection (page 27).
• Make sure "Ctrl for HDMI" is set to "ON"
in HDMI Settings menu.
• Make sure the connected component is
compatible with the Control for HDMI
function.
• Check the Control for HDMI settings on
the connected component. Refer to the
operating instructions of the connected
component.
• Repeat the procedures of "Preparing for
the "BRAVIA" Sync" if you change the
HDMI connection, connect/disconnect the
AC power cord (mains lead), or when
there is a power failure (page 70).
No sound is output from the receiver
and TV speaker while using the System
Audio Control function.
• Make sure the TV is compatible with the
System Audio Control function.
• If the TV does not have System Audio
Control function, set the "Audio Out"
settings in HDMI Settings menu to
– "TV+AMP" if you want to listen to the
sound from the TV speaker and
receiver.
– "AMP" if you want to listen to the
sound from the receiver.
• When you connect the receiver to a video
component (projector, etc.), sound may
not be output from the receiver. In this
case, select "AMP".
• If you cannot listen to the sound of a
component connected to the receiver
while TV input is selected on the receiver
– Change the input of the receiver to
HDMI when you want to watch a
program on a component connected via
HDMI connection to the receiver.
– Change the TV channel when you want
to watch a TV broadcast.
– Select the component or input you want
to watch when you watch a program on
the component connected to the TV.
Refer to the operating instructions of the
TV on this operation.
continued
GB
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents