Sony STR-DN1010 Operating Instructions Manual page 78

To use multiple S-AIR main
units
You can use multiple S-AIR main units by
setting a different ID for each component.
Sound transmission is established as follows
(example):
S-AIR main unit
(this receiver)
ID A
S-AIR sub S-AIR sub
unit unit
Notes
• Sources with copyright protection may not be
playable on S-AIR sub unit.
• If you have connected surround amplifier,
surround sound will not be output from S-AIR
main unit.
Pairing the S-AIR main unit with
a specific S-AIR sub unit
(Pairing operation)
To establish sound transmission, you need to
set the same ID for your S-AIR main unit and
S-AIR sub unit.
However, if your neighbors have S-AIR
products and their IDs are the same as yours,
your neighbors could receive the sound of
your S-AIR main unit or vice versa.
To prevent this, you can pair the S-AIR main
unit with a specific S-AIR sub unit by
performing the pairing operation.
GB
78
Other S-AIR main
unit
ID A ID B
ID A ID B
S-AIR sub unit
x Before pairing
Sound transmission is established by the ID
(example).
Your room
S-AIR main unit
(this receiver)
ID A
ID A
S-AIR sub unit
x After pairing
Sound transmission is established between the
paired S-AIR main unit and S-AIR sub unit(s)
only.
Your room
S-AIR main unit
(this receiver)
ID A
S-AIR sub unit
Pairing
Neighbor
ID A
S-AIR sub unit
Neighbor
No transmission
ID A
S-AIR sub unit