4B: Connecting The Video Components - Sony STR-DH700 Operating Instructions Manual

4b: Connecting the video components

How to connect your
components
This section describes how to connect your
video components to this receiver. Before you
begin, refer to "Component to be connected"
below for the pages which describe how to
connect each component.
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
After connecting all your components,
proceed to "5: Connecting the antennas
(aerials)" (page 27).
Component to be connected
Component
TV
With HDMI jack
DVD player/Blu-ray disc player 24
Satellite tuner/Set-top box
DVD recorder, VCR
Camcorder, video game, etc.
If you want to connect several
digital components, but cannot
find an unused input
See "Listening to digital sound from other
inputs (DIGITAL ASSIGN)" (page 81).
Video input/output jacks to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Page
19
22
Note
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
25
output to a TV via the receiver. Unless the power is
26
turned on, neither video nor audio signals will be
transmitted.
26
Y
HDMI
P / C
B B
/
P C
R R
COMPONENT VIDEO
Digital Analog
High quality image
VIDEO
21 GB