4b: Connecting the video components
How to connect your
This section describes how to connect your
video components to this receiver. Before you
begin, refer to "Component to be connected"
below for the pages which describe how to
connect each component.
Before connecting cords, make sure to
disconnect the AC power cord (mains lead).
After connecting all your components,
proceed to "5: Connecting the antennas
(aerials)" (page 22).
Component to be connected
With HDMI jack
Satellite tuner/Set-top box
Video input/output jacks to be
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
High quality image