Table of Contents
Advertisement
OPTIMUM
M A S C H I N E N - G E R M A N Y
1.6.2 Authorized persons
WARNING!
Inappropriate operation and maintenance of the radial drilling machine constitutes a
danger for the personnel, objects and the environment.
Only authorized personnel may operate the radial drilling machine !
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
The operating company must
train the personnel,
instruct the personnel in regular intervals (at least once a year) on
- all safety regulations relevant to the machine,
- its operation and
- generally accepted engineering standards.
check the personnel's knowledge level,
document the training/instruction,
have attendance at the training/instruction confirmed by signature and
check whether the personnel is working in a safety and risk-conscious manner and follow-
ing the operating instructions.
define and document the inspection deadlines for the machine in accordance with § 3 of the
Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the
Work Safety Act.
The operator must
have obtained a training regarding the handling of the radial drilling machine,
know the function and mode of action,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:
Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, following measures are to be
performed in the following order:
disconnect all poles
secure against restarting
check that there is no voltage.
1.7
User positions
The operator's position is in front of the radial drilling machine.
1.8
Safety measures during operation
CAUTION!
Danger due to inhaling dust and mist that is hazardous to health.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off at
the point of origin and is dissipated or filtered from the working area. To do so, use a
suitable extraction unit.
GB
RD5
Page 12
Original operating instructions
Obligations of
the operating
company
Obligations of
the operator
Additional
requirements
regarding the
qualification
Safety
Version 1.0
2017-03-13
Advertisement
Table of Contents
