Table of Contents
Advertisement
Interval
Where?
5.4
Recommended wear and tear parts
Extendable shift rod - item number circuit diagram B1
Position switch with spindle sleeve contracted, spindle sleeve extended circuit diagram B2
5.5
Adjustment of clearance on cantilever and drilling head
If needed, reduce the guide clearance between the cantilever arm and the drilling head.
Adjustment of vertical roll guidance:
Remove cover plate.
Undo screws (1).
Undo clamping screw at (2) with an Allen key, and turn the ring (2) with a suitable tool in the
hole.
Clamp the screws (1) again and check the free running of the drilling head with the hand
wheel using the entire travel on the cantilever.
Adjustment of horizontal roll guidance:
Undo screws (3):
Maintenance
Version 1.0
2017-03-13
What?
How?
The service life of the position switch of the spindle posi-
tion may have been reached due to the operating condi-
tions. Replacement is recommended to ensure further
safe and fault-free operation.
Replace the posi-
tion switch.
"Obligations of the operating company" on page 12
"Electronics" on page 19
Electrical inspec-
tion
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Positions switch
RD5
GB
Page 49
Advertisement
Table of Contents
