1.6.2 Authorized Persons; Operators Positions - Optimum OPTIdrill B 40GSP Operating Manual

1.6.2 Authorized persons

WARNING!
Inappropriate operation and maintenance of the geared drill constitutes a danger for the
staff, objects and the environment.
Only authorized staff may operate the geared drill!
Persons authorized to operate and maintain should be trained technical staff and instructed by
the ones who are working for the operating company and for the manufacturer.
The operating company must

train the staff,

instruct the staff in regular intervals (at least once a year) on
- all safety standards that apply to the machine,
- the operation,
- accredited technical guidelines,

check staff's state of knowledge,

document the trainings/instructions,

require staff to confirm participation in training/instructions by means of a signature,

check whether the staff is working safety- and risk-conscious and observe the operating
instructions.
The operator must

have obtained a training regarding the handling of the geared drill,

know the function and mode of action,

before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
For work on the following parts there are additional requirements:

Electric components or operating materials: Must only be performed by a qualified electri-
cian or person working under the instructions and supervision of a qualified electrician.
Before carrying out work on electrical components or operating units, the following measures
must be taken, in the order given.

Disconnect all poles.

Secure against switching on.

Check if the machine is zero potential.
1.7

Operators positions

The operator's position is in front of the geared
drill.
Safety
Version 2.1.1 - 2020-07-27
Img.1-1:
Translation of original instruction
Obligations of the
operating
company
Obligations of the
operator
Additional
requirements
regarding the
qualification
Operator positions
B40 GSP EN
11