Table of Contents
Advertisement
1.6.2 Authorized persons
WARNING!
Inappropriate operation and maintenance of the geared drill constitutes a danger for the
personnel, objects and the environment.
Only authorized personnel may operate the geared drill !
Authorized operating and maintenance personnel are specialists instructed and trained by the
operator and the manufacturer.
Obligations of the operating company
train the personnel,
instruct the personnel in regular intervals (at least once a year) on
- all safety regulations relevant to the machine,
- its operation and
- generally accepted engineering standards.
check the personnel's knowledge level,
document the training/instruction,
have attendance at the training/instruction confirmed by signature and
check whether the personnel is working in a safety and risk-conscious manner and follow-
ing the operating instructions.
define and document the inspection deadlines for the machine in accordance with § 3 of the
Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the
Work Safety Act.
Obligations of the operator
have obtained a training regarding the handling of the geared drill,
know the function and mode of action,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:
Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, the following actions must be
taken in the order given:
disconnect all poles,
secure against restarting,
check that there is no voltage.
Safety
Version 1.2.5 dated 2017-03-10
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Additional
requirements
regarding the
qualification
DH26GTV | DH28GSV | DH32GSV
GB
Page 13
Advertisement
Table of Contents
