If the fixing screws are too tight in particular in connection with an uneven substructure it may
result in a broken stand of the machine bed.
3.7
Top up oil, check oil level
ATTENTION!
The radial drilling machine is delivered without oil filling. First fill in oil before starting
the radial drilling machine.
"Oil sight glass spindle gear" on page 47
"Oil sight glass gear Lifting device Cantilever" on page 47
3.8
Coolant tank
Fill in the tank with a suitable coolant. Fill it up to a maximum of the centre of the wedge wire fil-
ter.
"Lubricant" on page 73
"Operating material" on page 21
Assembly
Version 1.0
2017-03-13
5/8" x 250
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
RD5
GB
Page 31