Table of Contents
Advertisement
Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.6.2
Authorized persons
WARNING!
Inappropriate operation and maintenance of the bench drill constitutes a danger for the
personnel, objects and the environment.
Only authorized personnel may operate the bench drill!
Authorized operating and maintenance personnel are specialists instructed and trained by the
operator and the manufacturer.
The operating company must
train the personnel,
instruct the personnel in regular intervals (at least once a year) on
- all safety regulations relevant to the machine,
- its operation and
- generally accepted engineering standards.
check the personnel's knowledge level,
document the training/instruction,
have attendance at the training/instruction confirmed by signature and
check whether the personnel is working in a safety and risk-conscious manner and follo-
wing the operating instructions.
The operator must
have obtained a training regarding the handling of the radial drilling machine,
know the function and mode of action,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:
Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, the following actions must be
taken in the order given:
disconnect all poles,
secure against restarting,
check that there is no voltage.
1.7
User positions
The operator position is in front of the bench drill.
GB
B16H
10
Translation of the original instructions
Obligations of the
operating
company
Obligations of the
operator
Additional
requirements
regarding the
qualification
Safety
Version 2.0.1 - 2020-7-17
Advertisement
Table of Contents
