Qualification Of Personnel; Target Group; Authorized Personnel - Optimum OPTidrill DH 24BV Operating Manual

All additional devices installed by the operator have to be equipped with the prescribed
safety devices.
This is your responsibility being the operating company!

Safety devices on page 73
1.6

Qualification of personnel

1.6.1

Target group

This manual is addressed to
the operating companies,

the operators,

the maintenance personnel.

Therefore, the warning notes refer to both, operation and maintenance personnel of the drilling
machine.
Determine clearly and explicitly who will be responsible for the different activities on the
machine (operation, maintenance and repair).
Unclear responsibilities constitute a safety risk!
Always disconnect plug of the drilling machine from the electrical power supply. This will pre-
vent it from being used by unauthorized persons.
The qualifications of the personnel for the different tasks are mentioned below:
Operator
The operator is instructed by the operating company about the assigned tasks and possible
risks in case of improper behaviour. Any tasks which need to be performed beyond the opera-
tion in standard mode must only be performed by the operator, if so indicated in these instruc-
tions and if the operator has been expressively commissioned by the operating company.
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective
standards and regulations, qualified electricians are able to perform work on the electrical sys-
tem and recognise and avoid any possible dangers.
Qualified electricians have been specially trained for the working environment, in which they are
working and know the relevant standards and regulations.
Qualified personnel
Thanks to professional training, knowledge and experience as well as knowledge of relevant
regulations the qualified personnel is able to perform the assigned tasks and to independently
recognise and avoid any possible dangers themselves.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.6.2

Authorized personnel

WARNING!
Inappropriate operation and maintenance of the drilling machine constitutes a danger for
the personnel objects and the environment.
Only authorized staff may operate the drilling machine!
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
Safety
Version 1.1.4 - 2022-09-14
DH24BV | DH28BV | DH34BV | DH40BV
Translation of original instruction
EN
71