Table of Contents
Advertisement
OPTIMUM
M A S C H I N E N - G E R M A N Y
3
Assembly
3.1
Unpacking the machine
Leave the machine nearby its definite position before unpacking. If the packaging shows signs
of possible transport damage, take the necessary precautions not to damage the machine
when unpacking. If any damage is discovered, the carrier and/or shipper must immediately be
notified of this fact to establish any claim which might arise.
Inspect the machine completely and carefully, making sure that all materials, such as shipping
documents, manuals and accessories supplied with the machine have been received.
3.1.1 StandardAccessories
Toolbox contains:
- 1 x oil bottle for oiler
- 1 x grease press for grease nipple
- 1 set of Allen keys
- 2 x drill drift wedge
- 1 x cross-head and slotted screwdriver
Including:
- 1 x clamping table
- 6 x adjusting shims for levelling the machine.
- 6 x threaded rod M16 x 240 with nuts and washers for anchoring to the floor.
- 6 x adjusting screws 5/8" UNC, already screwed into the substructure
- 1 x printed operating manual.
Optional anchor bolts DIN 529 M16 x 320 are not supplied.
3.2
Transport
Centres of gravity
Load suspension points
(Marking of the positions for the
load suspension gear)
Prescribed transport position
(Marking of the top surface)
Means of transport to be used
Weights
WARNING!
Severe or fatal injuries may occur if parts of the machine tumble or fall down from the
forklift truck or from the transport vehicle. Follow the instructions and information on
the transport box.
GB
RD5
Page 24
Original operating instructions
Assembly
Version 1.0
2017-03-13
Advertisement
Table of Contents
