Intended Use; Reasonably Foreseeable Misuse - Optimum OPTIdrill RD 5 Operating Manual

1.3

Intended use

WARNING!
In the event of improper use, the radial drilling machine

will endanger personnel,

will endanger the machine and other material property of the operating company,
the correct function of the radial drilling machine may be affected.
The radial drilling machine is designed and manufactured to be used in a non-explosive envi-
ronment. The radial drilling machine is designed and manufactured for holes in cold metals or
other non flammable materials or that not constitute a health hazard using a rotating filing-strip-
ping tool that has a number of grooves for collecting the filings.
If radial drilling machine is used in any way other than described above, modified without the
approval of the company Optimum Maschinen Germany GmbH then the drilling machine is
being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that
observe the limits of the radial drilling machine,

the operating manual is observed,

the inspection and maintenance instructions are observed.


"Technical specification" on page 20
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alterations to the operation values of the
radial drilling machine! They could endanger the personnel and cause damage to the
radial drilling machine.
1.4

Reasonably foreseeable misuse

Any other use other than that specified under "Intended use" or any use beyond the described
use shall be deemed as non-intended use and is not permissible.
Any other use has to be discussed with the manufacturer.
It is only allowed to process metal, cold and non-inflammable materials with the radial drilling
machine.
In order to avoid misuse, it is necessary to read and understand the operating instructions
before the first commissioning.
The operators must be qualified.
Safety
Version 1.0 2017-03-13 Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
RD5 GB
Page 9