Maytag MXS20 Programming Manual page 33

The Extract Sequence
Extract
Drain
Menu Item
Drain Valve
RPM
Time
Exit
The No Drain Sequence
Drain Extract
• The Drain/Extraction part of the programmed step is skipped.
IMPORTANT: For some specific functions "No Drain" must be programmed.
Example: If you want to program a Cool Down Sequence, then "No Drain" must be programmed between the Hot Wash and the Cool
Down Sequence.
Menu Item
Exit
Static Drain Sequence
Drain Extract
The drum is at standstill while the water is drained.
Menu Item
Drain Valve
RPM
Time
Exit
IMPORTANT: In a Static Drain Sequence, the garments are not distributed around the drum while the water is drained. When the Spin
Sequence starts, the garments are very imbalanced and the imbalance (tilt) function will be activated. To avoid imbalance, (tilt) activation,
do not program a Spin Sequence immediately after a Static Drain Sequence.
No Drain Static Drain
Description
Only available on washers with both a normal Open and
normal Closed Drain valve.
The suggested RPM depends on the Machine Type.
The Extract Sequence Time.
(for 0 minutes the Extract sequence will be skipped)
(programmable in steps of 0.5 minutes)
Return to Edit Program Menu.
No Drain
Static Drain
Description
Return to Edit Program Menu.
Static Drain
No Drain
Description
Only available on washers with both a normal Open and
normal Closed Drain valve.
The suggested RPM depends on the Machine Type.
The Static Drain Sequence Time.
(for 0 minutes the Static Drain Sequence will be skipped)
(programmable in steps of 0.5 minutes)
Return to Edit Program Menu.
Reversing Drain
Reversing Drain
Reversing Drain
Default Limits
1 1–2
– See Table A-5
4.5 min 0–15.0 min
Default Limits
Default Limits
1 1–2
– See Table A-5
0.5 min 0–15.0 min
33