Service Information - Maytag MXS20 Programming Manual

IMPORTANT:
Disconnect the washer from the source of power and wait
n
until the wash water cools down or drains before servicing
or repairing the washer.
Please follow all instructions in this manual and the labels as
n
well as basic safety precautions to avoid burns, scalds, and
electric shock.
MAINTENANCE
Disconnect from the power supply before proceeding!
Use a slightly damp cloth to remove any dirt from the
n
touch pad.
NOTE: Do not use aggressive soaps, caustic chemicals,
gasoline, or other organic solvents. These materials could
damage the touch pad.
INFORMATION FOR SERVICE:
The software version, along with the washer serial
number (including order the code), must be provided in all
correspondence or inquires to Maytag.
SPECIFICATIONS:
Voltage: 200-240 Vac, 50/60 Hz
Power: max 20 VA
Output:
24 relays
Serial interface: RS485 (2 wire) networking between washer
computer and external device (PC Computer)
Display: LCD display

SERVICE INFORMATION

PROGRAMMER CIRCUIT BOARD
CPU board
I/O board
71