Cycle Programming; Program Menu; Program Functions - Maytag MXS20 Programming Manual

Specific functions have been implemented in the washer computer
to allow for a detailed programming.
Functions for the Complete Program:
Program Number: Select the wash program.
n
Name: Insert or modify the name for the program.
n
View: Inspect the program settings without making changes.
n
Edit: Make changes to a program.
n
New: Create a new program.
n
Copy: Make a copy of an existing program.
n
Delete: Erase a program.
n
Exit: Leave the Program Menu.
n
Functions for the Program Steps:
Step Number: Select the program step.
n
Add: Add a program step at the end of the program.
n
Edit: Adjust a program step.
n
Insert: Add a program step between two other steps.
n
View: Inspect the step settings without making changes.
n
Delete: Delete a step.
n
Exit: Leave the program step menu.
n
Follow the flowchart on the proceeding page step-by-step.

Program Menu

Initialization allows you to choose standard default program
settings for your application.
1. Make sure power is ON and no program is running.
2. Enter SETUP MODE. The Main Menu will be displayed.
3. Press 5 or 6 to select the Program Menu.
Main Menu
Initialization ...
Program ...
Service ...
4. Press ENTER .

Program Functions

Program Menu
Select Program N:
Name: HOT INTENS
View ... New ...
Edit ... Copy ...

CYCLE PROGRAMMING

Configuration ...
Advanced ...
Delete ...
Exit
Menu Item Description
Select Program N: Select program 1 to 99.
Name: _ _ _ _ _ _ _ _ _ The Program Name describes the
wash cycle. Press ENTER when the
cycle name is complete. Select the
Character with the 5 and 6 arrows.
Select the character position with the
3 and 4 arrows.
View Allows you to see the Program
Settings without changing them.
Edit Allows you to change a program
by selecting new sequences from
a menu or by changing values in
an existing step. You can also add,
insert, or delete sequences from
an existing program.
New To create a new program, you have to
use the Add Step function. By adding
steps, the program will grow step by
step. A confirmation is asked first to
delete the old program.
Copy HINT: To create a new program,
with minor changes from an existing
program, it is easier to copy an
existing program than to make
changes.
Copy From Insert the desired program number
Program N°: XXX from which you want to copy the
program.
The standard programs can be
selected with program numbers
101–120.
Program number 101 corresponds
with program 1.
Program number 102 corresponds
with program 2.
Program number 120 corresponds
with program 20.
A confirmation is asked first to delete
the old program.
Delete Old Program To delete an existing program,
use the delete program function.
The complete program will be erased
at once.
A confirmation is asked first to delete
the old program.
Exit Return to Main Menu
: Program Lock Symbol
In the Advanced Menu, it is possible to lock/unlock each wash
program individually. The wash program cannot be changed when
the Program Lock Symbol is displayed. Only the View function will
be operational – all others will be disabled until unlocked.
21