Send Command To Connected Sensor; Laser Off / Laser On; Find C-Box/2A - MICRO-EPSILON C-Box/2A Operating Instructions Manual

Appendix | ASCII Communication with Sensor
Group
A 2.4.19
A 2.4.20
A 2.4.21
A 2.4.22
A 2.4.23
A 2.4.24
A 2.4.25
A 2.4.26
A 2.4.27
A 2.4.28
A 2.4.29
A 2.4.30
A 2.4.31
A 2.4.32
A 2.4.33
A 2.4.34
A 2.4.35
A 2.5
A 2.6
C-Box/2A
Chapter Short info
Chap. A 2.4.19 Setting masters / zero
Chap. A 2.4.20 Selection digital output
Chap. A 2.4.21 Output data rate
Chap. A 2.4.22 Scale output values
Chap. A 2.4.23 Error processing
Chap. A 2.4.24 Data selection for USB
Chap. A 2.4.25 Data selection for Ethernet
Chap. A 2.4.26 Function selection multifunctional input
Chap. A 2.4.27 Activate error output, switching output 1
Chap. A 2.4.28 Activate error output, switching output 2
Chap. A 2.4.29 Limit values
Chap. A 2.4.30 Data selection
Chap. A 2.4.31 Output range
Chap. A 2.4.32 Two-point scaling
Chap. A 2.4.33

Send command to connected sensor

Chap. A 2.4.34

Laser off / laser on

Chap. A 2.4.35

Find C-Box/2A

Chap. A 2.5 Error values via USB
Chap. A 2.6 Error values via Ethernet
Page 84